CTS 031: Band Steering with Francois Verges




Clear To Send: Wireless Network Engineering show

Summary: Band Steering<br> What is wireless band steering? Band steering is a method or feature within enterprise access points to sending dual-band stations to the 5 GHz band instead of the 2.4 GHz band.<br> Band Steering enabled access points delay responses to 2 GHz probe response frames.<br> Why would you want to enable band steering? The most common reason is to encourage 5 GHz capable stations to leave the congested 2.4 GHz band thus leaving legacy devices behind. The 2.4 GHz band has three non-overlapping channels which provides wireless engineers with a less channels to re-use. The 5 GHz band has 24 non-overlapping channels using 20 MHz channel-widths.<br> <a href="http://www.semfionetworks.com/">Francois Verges</a> joins me as the special guest on the show to discuss the merits of band steering, why you should use it and also what you should look out for if you do implement this feature.<br> As I work primarily with Cisco wireless networks, I’ve provided an example of how to configure band steering. Cisco’s terminology for band steering is called <a href="https://www.packet6.com/configure-cisco-band-select/">Band Select</a>.<br> I won’t go into the differences between Band Select and Band Steering in this episode. This is simply to show everyone where band steering can be enabled.<br> To view Cisco WLC Band Select settings:<br> Cisco Band Select is enabled by default on the Cisco WLC.<a href="#">/caption</a><br> Band Select is enabled by default on a Cisco WLC. The global settings for Band Select are located at Wireless &gt; Advanced &gt; Band Select.<br> <br> Although Band Select is enabled globally on the controller, the setting itself must be enabled on the WLAN.<br> This Week In Wireless<br> Cisco Revises the <a href="https://www.packet6.com/ccnp-wireless-updated/">CCNP Wireless Certification</a><br>