Bikerumor Podcast

If you've ever wondered how route creation and ride mapping works, you're going to love this episode. My guest is Eric Semianczuk, co-founder of Sherpa Map. I'm guessing you haven't heard of them… yet. But the cycling route map service they're building is incredible, using AI and granular LIDAR data compiled over weather, surface type, and elevation data to create the most sophisticated route data you can imagine. And they just keep improving it. It's wild, and in this episode, Eric explains how they got started, how mapping and route building works, and how they're using AI to predict everything from surface type to how many calories you'll need and even advise on tire selection for your next race. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Spotify, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click here to send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

So, apparently, not every cheap e-bike sucks after all. Until recently I was firmly in the camp that cheap, hub-motor e-bikes with cadence sensors were all terrible and unsafe. Then I talked to Kevin Dugger, founder of Ride1Up e-bikes, and he changed my mind. It's not so much the bikes that bugged me, although we'll talk about that, too, it was the cadence sensors that told the motor to start going. It turns out, there's a lot more to the "on" of "off" systems of the early days or the cheapest bikes. Also, it turns out there are also some really good use cases for hub motors and cadence sensors, and that their performance, or lack thereof, really comes down to how their controllers are programmed. Kevin and I get into the details of what makes a good cadence sensor system, when you might want one instead of a torque sensor mid-drive bike, and lots of other interesting details about making e-bikes affordable without sacrificing quality and safety. If you're in the market for an e-bike but have a small budget, you'll definitely want to listen to this one. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Spotify, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click here to send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn.

If you've never seen any of Park Tool's tutorial videos or stopped by their booth at Sea Otter Classic, then you've been missing the wonder that is Calvin Jones. His energy levels and excitement for tools and bike repairs is contagious, so I'm super stoked to share this interview with you. We talk about his favorite tools, where repairs go wrong and how they overcome stuck and stripped bolts, among many other things. We also talk about Park Tool's history, why they're blue and why that color is so important to their brand, and how they come up with ideas for new tools. I really enjoyed this one, and some of his insights on learning are world class. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

Recently, I had a chance to meet with BMC and Red Bull's Advanced Technology Team to learn about and ride their new Teammachine R, a top level, lightweight aero road racing bike. But I left with questions, so in this episode I have Stefan Christ from the BMC product team and Rob Gray, technical director at Red Bull Advanced Technologies on board to discuss how they applied F1 technologies to a bike, what they learned about aerodynamics, and more. We even touch on drive by wire systems and the potential for wireless or electronic brakes. If you geek out on details, or are just curious about why an energy drink brand would be involved in high-tech CFD and composites, this one should scratch that itch nicely. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

I wasn't really sure what I was going to talk about with my guest today, but it ended up being a wonderfully deep dive into speed, power development and strength training. If you want to get into the weeds on how to get faster and stronger on the bike, you'll love this episode. My guest is Thomson Remo, lead educator for Watt Bike's professional division. Watt Bike makes a very smart, precise indoor bike that's used by USA Cycling and the UCI for talent identification, and their professional division supplies gyms and professional sporting teams around the world. Thomson develops the protocols used to measure fitness and power, and in this episode talks about what metrics matter, how to effectively combine resistance and cadence, and what training, lifting, and speed workouts specifically translate into riding faster and longer. If you're ready to build power and speed, get ready to take notes. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER

We hear so much about inclusivity these days, but not usually when it comes to our mountain bike trails. Turns out, it's not that hard to make our trails more accessible to a wider range of riders, letting all of your friends enjoy the same awesome experience you and I enjoy every time we hit the singletrack. Besides the warm fuzzies, there's often good money and resources available to help make it happen, too! My guests today are Nick Bennett and Greg Durso, two of the riders and trail builders leading Vermont's charge to make more of their hundreds of miles of singletrack accessible to adaptive riders. I've ridden some of these trails, and they're awesome. But what makes them super rad is that every rider can enjoy them, and trust me, they are not watered down in any way. If you've ever wondered what it would take to make your local trails adaptive bike friendly, or what it's like to experience a trail from their perspective, this episode is for you. Be sure to check the links in this episode's show notes at Bikerumor.com/podcast for resources and their instagram profiles to see the bikes and trails in action. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

If you've ever wondered what it's like to start a cycling clothing brand, and not just any brand, but a really cool brand, you'll love this episode. My guest is Matt Quann, founder of Ornot, and they just celebrated 10 years in business.  We talk about how he kicked things off, what sparked the idea, and where the name came from. Admittedly, we talk a lot about the business side of things on this one, but even if you're not entrepreneurial minded, it's a good look at how things work and what some of the latest eco-friendly materials, labels, and terms mean. If you''re into all that, give it a listen, or not. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

There are a lot of candid conversations that happen when industry folks get together, and one of my favorite people to chat with is Randall Jacobs, founder of Thesis Bikes and Logos components. Before he launched those brands, he worked for others and helped develop some interesting technologies that you may or may not see in future products. Whether you do or don't isn't the point, though, it's really about why you haven't seen them already. There's a lot of stuff that happens behind the scenes of product development, and in this episode we talk about how things work, why bikes aren't as advanced as they could be, and why the patent process really needs an overhaul.  This one might rattle a few cages, but I think you're going to really enjoy this inside look at the bike industry. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

Sometimes, I get guests on the show because they're with a brand that's in the news, or there's a technical story that needs an expert opinion. And sometimes, it's just to have a conversation with someone cool. My guest today is former pro roadie Ian Boswell, and he definitely falls into that latter category, although he does have a few things coming up that you may want to check out. We talk about how he transitioned from racing full-time at the highest level to working a "9-5 gig" with Wahoo, and then he reveals not one but two different gravel events he's part of, and an experimental bikepacking weekend that might turn into something much bigger. IAN'S SOCIAL & EVENT LINKS Check out Ian's Instagram to keep up with his latest adventures, and check out the Bici Bucerias Gravel Camp in Mexico and his Peacham Fall Fondo if you'd like to join him on a ride! WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

A little while back, Parlee Cycles filed for bankruptcy protection and seemed like another big brand suffering the consequences of the pandemic boom and bust. But now they're back, with a new owner, new ideas, and fresh funding. My guest today is John Harrison, a long-time Parlee fan and tech turnaround guy that saw an opportunity to breathe new life into the legendary drop bar brand. We talk about what led to Parlee's bankruptcy, what they learned from it, and more importantly where the brand is headed and what new bikes are on the horizon! It's a great chat, and if you're a fan of the brand like I am, it's definitely a big sigh of relief to see that they're building a company that's focused on smart growth and continuing their heritage of premium bikes and forward-thinking designs. Get the full story here:https://www.bikerumor.com/parlee-cycles-is-back-w-new-owner-same-advanced-vision/ WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

You may have noticed something weird that launched, something unexpected. Moots, long known for their high-end titanium bicycles surprised everyone with a carbon fiber gravel e-bike, using a frame material they've never used before, and adding a motor for the first time in their history. I talk to Nate Bradley, Moots' president and one of the key people behind the new model, about how it came to be, why they did it, and what's next for the brand. And, of course, we talk about those wild oversized 750D gravel wheels and tires they showed off at SBT and the MADE show. Check out the full tech story for more photos here:https://bikerumor.com/moots-express-carbon-e-gravel-bike/ And the 750D wheels story here:https://bikerumor.com/new-bicycle-wheel-size-moots-prototype-750d-wheels-tires-wtb/ WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

While at the new Shimano GRX 12-speed gravel bike group launch, we sat down with two team members responsible for helping bring it to life to talk about what's changed, what didn't (and why), and how the group has evolved to fit the needs of modern gravel riders. We also discuss the global gravel scene's evolution, how Shimano fits into it, and plenty of tech geekery and little details. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

If you think mountain bike suspension is a mystery, you're not alone. From kinematics to anti-squat to compression ratios, there's a lot of terminology piled on top of designs like VPP, Horst Link, CVA, DW Link.  Add CBF to that list and you have the suspension design and philosophy of Chris Canfield. He's my guest today and had been designing full suspension mountain bikes for almost 25 years. We talk about how things work, why multi-linkage bikes work well (as well as why some maybe don't work as well as others), and we try, really hard, to explain brake jack and why braking forces negatively affect suspension performance. And after all that, we talk about not one, but TWO new suspension patents he's working on that are truly wild, and he explains them publicly for the very first time, right here. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Stitcher, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

If you've ever thought you could make your own energy bar, or sports drink, or any other kind of athletic food, it's always good to hear how others have done it. My guest today is Jess Cerra, founder of JoJe Bar, a gluten free, real food energy bar designed for endurance athletes. She shares her startup story, telling the unlikely series of events that led to launching, building, and ultimately selling a sports nutrition brand. We also talk a little about how her upbringing and support throughout her racing career came full circle to putting on her own event that helps fund scholarships for other girls in her community. It's a fun story that, as a fellow entrepreneur, I love sharing to inspire you to follow your own dreams and see where they take you. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Stitcher, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn

A couple episodes ago, Lachlan Morton shared his plans for an around the world record attempt. In this episode, I'm talking to someone who's actually done it. In 2018, Jenny Graham set the women's speed record for riding 18,000 miles around the world in 124 days and 11 hours. And she did it unsupported, without, well…we'll get to that, because the extent of her minimalism is pretty remarkable and I want you to hear it in her words. Her story is captured in a new book called Coffee First, Then The World, and we talk about her experience documenting the ride, how she planned for it, the equipment and challenges of keeping a bike going day in and day out, overcoming the physical challenges of such an undertaking, the opportunities it's created for her, and so much more. WANT MORE?  Find the Bikerumor Podcast on Apple Podcasts, Stitcher, Podbean, and through RSS, or wherever you listen to podcasts! Can't find it? Let us know which players you use so we can get them up to speed! And let us know who you want us to interview. Click that PODCAST link in the menu and send in your suggestions! Hit like, hit subscribe, and hit play. Then just get out and ride! FOLLOW BIKERUMOR Keep tabs on all the latest bikes, wheels, components, gear and tech on The World's Largest Cycling Tech Blog by following us on Facebook, Twitter and Instagram. FOLLOW TYLER Like us? Love us? Follow your host, Tyler Benedict, on Twitter, Instagram and LinkedIn